Small razor saw. 'very smooth' 5 blades/5 pieces

Small modeling saws with very fine teeth, five pieces (CMK)

A set from the Czech brand CMK containing five small saw blades with very fine teeth, as the manufacturer states. The small format means that the blade reaches places where a larger saw would not fit, and the fine teeth leave a narrow kerf and a smooth edge. A set of several blades is useful also because fine blades break when handled roughly and it is practical to have a spare at hand. Whether a handle is included in the package is stated on the packaging.

Use

• accurate cuts in plastic parts in tight places
• separating small parts and cutting off casting blocks on resin
• opening up the seam between parts you want to seat in a different position
• trimming profiles and plastic rods to an exact length

How to work with them

A small blade takes only a small amount of pressure, so guide the saw lightly and let the teeth do the cutting. Support the part as close to the cut as possible, otherwise the plastic bends and the blade bites in. Start the cut with a few pulls toward yourself into a shallow groove and only then continue with a full stroke. With resin work slowly so that the material does not crumble, and do not inhale the dust. After the cut, level the edge with a sanding stick. Store the blades so that they do not knock against each other, as the fine teeth are easily damaged.

Who the set is for

For modelers who often work with small parts and accessories and need a clean cut in a small space. Given the number of pieces it is a practical choice for anyone who builds continuously and does not want to be held up looking for a replacement blade.

A tool with sharp blades. Keep it out of the reach of children and protect the fingers holding the part while you work.