Brengun 1:144 access ladders for the MiG-15 and MiG-17 in two patterns are a photo-etched accessory to a model, not a kit. They give an aircraft on its hardstand the equipment that inevitably belongs with it.
Responsibility details are not available.
The set holds access ladders in two patterns. They are etched from thin sheet, bent into a three-dimensional shape and, on a finished model, lean against the side of the fuselage or stand on their own next to the aircraft. It is not a model or a kit; it is an accessory for a model and for a diorama scene, made by the Czech brand Brengun.
The MiG-15 and MiG-17 are Soviet jet fighters of the late 1940s and the 1950s with a swept wing and a single-seat cockpit. The cockpit sits high above the ground, so a pilot boarded it by a portable ladder hooked onto the side of the fuselage. More than one pattern of ladder was used depending on the production batch and the operator, which is why the set offers two patterns.
Cut the part out of the fret with a scalpel on a hard surface, not with scissors, as those will ripple the metal. Make the bends in a photo-etch bending tool or between two razor blades. Bend the rungs gradually, one after another, not all at once. If the material is too springy and will not hold its shape, warm it briefly over a flame and let it cool, which softens it. Degrease the metal with alcohol before painting and apply a primer, as paint otherwise does not hold on smooth metal. A finished ladder is brought to life by a dark wash run into the recesses and a light dry brush in a paler shade on the edges. Because of the size of the parts, work with tweezers over a light surface.
This is an accessory to a model, not a kit. The aircraft model, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
