Brengun 1:144 Fw 190D Dora is a photo-etched detail set for a plastic kit, not an aircraft model. According to the name there are two sets in the box, that is material for a pair of models. Target kit: Platz.
Responsibility details are not available.
An aftermarket accessory from the Czech maker Brengun for the Platz plastic Fw 190D model. It is not a kit but frets of photo-etched metal parts. According to the name the box holds two sets, which matches the fact that kits in this scale are often sold two to a box.
The Fw 190D, nicknamed Dora, was the version of the German single-engine fighter with a liquid-cooled inverted V12 engine in place of the radial used until then. Because of that it has a markedly lengthened nose and rear fuselage, so it is told from the older short-fuselage versions at first glance even in a small scale.
The most common reason why paint later flakes off the photo-etched parts of a finished model is grease. The fret is protected by a thin film from the factory and picks up grease from your fingers during handling. Before building, therefore, rinse the parts with alcohol or dip them briefly in a degreasing bath, and from then on pick them up only with tweezers. Next comes a thin coat of primer, sprayed if possible, because a brush clogs the detail on small parts. Only over the primer come the covering shade and any interior color. Use super glue only once the primer has dried; the joint is cleaner that way.
The set is an accessory to a plastic kit, which it does not include. The parts are supplied unpainted; glue, paints and the model itself are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
