A photo-etched metal set for a model of the Dassault Mirage 2000N aircraft in 1:32 scale. The extent of the parts is given in the manufacturer's instructions.
Responsibility details are not available.
Photo-etched metal parts for a Dassault Mirage 2000N model in 1:32 scale. A metal fret is only a fraction of a millimeter thick, and that is exactly its point: it replaces plastic parts where the material should be almost imperceptibly thin in scale. In a large scale, where a model takes a close look, the difference between a thin metal edge and its plastic counterpart is noticed at once. The extent of the set is given in the manufacturer's instructions; plan the order of the build from them.
The Mirage 2000 is a French fighter with a delta wing and without horizontal tail surfaces. The 2000N version is a two-seat strike variant that was intended to carry nuclear armament. The longer cabin for a crew of two tells it apart from the single-seat machines at first glance, so the interior stays clearly visible on a model even after the canopy is closed.
Separate the parts from the fret with a sharp blade on a hard surface, as cutters will bend the sheet. Level the remains of the tab with a fine file so that the part seats. Make the fold over a sharp edge, best in a bending tool or between the jaws of flat tweezers, and do it at the first attempt; repeated folding tires the material and it cracks. Dose super glue in tiny drops, and on larger areas two-part epoxy suits better, as it gives time to align things. Before painting, degrease the metal and apply a base coat, or the paint will rub off during handling alone.
The aircraft kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
