A German naval observer is a resin figure in 1:32 from Copper State Models. It is supplied unassembled and unpainted as an accessory to models of naval aircraft of the First World War.
Responsibility details are not available.
A resin figure in 1:32 depicting an observer of Imperial German naval aviation of the First World War period. The casting is meant as an accessory to large models of two-seat naval aircraft and for the matching dioramas. It is supplied unassembled and unpainted; it is not a finished figure.
During the First World War Imperial German naval aviation operated floatplanes from coastal bases. The observer in a two-seat machine saw to navigation over the sea, watching the water, working the photographic equipment and the radio link and, if need be, the flexible gun in the rear compartment. Flying was done in open cockpits, so the kit was adapted to the cold and damp over the sea.
Wash the casting in lukewarm water with detergent and free it of the remains of release agent. Cut the casting blocks off with a fine saw and sand the surfaces wet and with protection for your airways. It is bonded with super glue (cyanoacrylate). If you are settling the figure into the cockpit of a model, try the position dry before the cockpit is closed up. After the primer, paint with a brush, telling the leather and canvas parts apart by a different degree of sheen and completing them with a fine wash.
The figure is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
