The photo-etched HGW 1:32 Hansa-Brandenburg W.12 - Engine is a set of fine metal parts for bringing out the engine of a large-scale model of the German floatplane fighter biplane. It is not a model.
Responsibility details are not available.
This is a photo-etched detail accessory, not a model of the airplane. The set brings fine metal parts for bringing out the engine and its surroundings on a large-scale model of the German two-seat floatplane fighter biplane the Hansa-Brandenburg W.12 of the First World War in 1:32 scale.
The Hansa-Brandenburg W.12 was powered by a water-cooled inline engine with clearly visible cylinders and valve gear. On the real subject part of the power unit was uncovered, so the engine becomes a rewarding place for refining detail. The machines served with the Imperial German Navy over the North Sea.
The photo-etched parts are of thin sheet, brass or steel, on a common fret. Cut the individual parts off with a sharp knife on a hard surface and bend the folds exactly along the marked lines, best of all in a bending tool or on a straight blade. Glue with super glue (cyanoacrylate); on larger surfaces a two-part epoxy can be used for a longer time to position the part. Degrease the flat sheet before painting and apply a thin layer of primer, so that the fine relief stays sharp.
This is not a complete model of the airplane. The set does not contain glue, paints or a kit; it serves as a detail accessory to a base model.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
