Techmod 1:32 Polish National Insignias is a sheet of waterslide decals with Polish aircraft national insignia, the so-called checkerboards, for aircraft models in 1:32.
Responsibility details are not available.
This sheet of waterslide decals from the Polish manufacturer Techmod holds Polish aircraft national insignia in 1:32. It is not a kit or a model but an accessory: you use the insignia on a model of a Polish Air Force aircraft, on a conversion into Polish colors, or as a replacement for decals that a kit lacks or that are damaged or yellowed.
The Polish aircraft national insignia has the shape of a square divided into four fields in alternating white and red with a border. It is carried on the fuselage, on the wings and, depending on the type, on the vertical tail surface as well. The insignia are printed on a thin carrier film, so once dry and given a clear coat they merge with the surface of the model almost completely.
Apply the decals exclusively onto a gloss coat that is perfectly dry; on a matte surface the so-called silvering appears, that is a white haze under the film. Cut the insignia out as close to the edge as possible, immerse it for a few seconds in lukewarm water, let it rest on a paper towel and slide it onto a spot dampened in advance. Tune the position with a soft brush and draw the surplus water off. A decal softener will help settle the insignia over rivets and engraved lines. At the end give the whole model a matte or semi-gloss coat.
This is a separate accessory. The model, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
