1:48 Messerschmitt Bf 109G-6

1:48 Messerschmitt Bf 109G-6 – masking set (HGW)

This is a set of self-adhesive masking films, not a model on its own. The HGW masks are cut precisely from fine Japanese paper tape, the kabuki type, and they serve to mask the transparent areas when spraying the Messerschmitt Bf 109G-6 fighter in 1:48 scale. They let the canopy frames and the other transparencies be sprayed sharply and with no paint creeping under the edge. The masks are designed to the shape of the matching kit in this scale and they are not intended for the model itself.

The real subject

The Messerschmitt Bf 109G-6 was the most widespread variant of the whole Gustav series and one of the most heavily produced versions of the Bf 109 of all. Characteristic of it are the covers over the gun breeches on the upper part of the engine cowling, known as the Beule, brought about by the installation of heavier synchronized machine guns. It served from 1943 to the end of the war in many modifications and armament fits.

Use and tips

Take the parts off the sheet carefully, transfer them onto a cleaned and degreased transparency and press the edges down carefully so that the paint does not creep under. The masks copy the framing of the canopy, so laborious cutting of tape is unnecessary. Use thin coats of paint on the small areas and lift the mask off while the spray has only just dried. The remaining parts of the sheet can be used to cover the surrounding areas against overspray.

Who the set is for

• Modelers building the Messerschmitt Bf 109G-6 aircraft in 1:48 scale
• Those who want clean and sharp canopy frames without cutting tape by hand
• Beginners as well as advanced builders who want to save time masking transparencies
• Collectors who care about a precise finish on the transparencies

This is an accessory for masking; the kit itself, paints and glue are not included in the package.