Kabuki masks for the B-52G and B-52H Stratofortress at the BASIC level, 1:72 scale from New Ware are an accessory for painting a model, not a kit. You can handle the extensive glazing of the bomber without hours of handwork.
Responsibility details are not available.
A masking set from New Ware intended for a model of the eight-engine B-52G or B-52H bomber in 1:72 scale. The masks are cut from kabuki paper, which holds its shape, follows gentle curves well and leaves no adhesive on the finish when removed. The set is not a model of the aircraft: it is an accessory used while painting one.
The Stratofortress has intricate flight deck glazing with a great many short straight frames. They are the hardest part of a model to line by hand: the brush slips, the stroke is not the same width and a correction means repainting the glass too. A pre-cut mask sidesteps that problem and, above all, gives you back the time you would otherwise spend on touching up.
If a matte film is left on the glass after the mask is removed, do not reach for a thinner, as it would dissolve the finish underneath as well. A soft microfiber cloth, moistened with clean water if necessary, and a gentle circular motion are enough. Remove residue in the corner of a frame with a wooden toothpick, never with a metal tool. The clarity of the glass is then restored by a thin coat of gloss clear.
The package contains masks only. The kit, paints and glue are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
