1:72 Luftwaffe Balkenkreuze Early - Part II

Luftwaffe Balkenkreuze Early — Part II 1:72 is a set of self-adhesive masks for spraying German national crosses in the early pattern. It is the second part of a series, that is, an accessory for painting, not a model.

Scale1:72
Manufacturer Armycast
Product EAN8591111000000

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

German Balkenkreuz bar crosses, early pattern, masks 1:72, part two

A set of cut self-adhesive masks from the Czech manufacturer Armycast for aircraft models in 1:72 scale. It serves for spraying the German national cross, the so-called Balkenkreuz, in the early pattern. The series is divided into several parts; this is the second of them and it follows on from the first. These are not decals and not a kit — the package holds only masks, through which the insignia is sprayed in paint straight onto the model.

The national insignia

The Balkenkreuz is a squared bar cross that was used by the Luftwaffe as its national marking. Its graphic form changed over time: the early pattern worked with broad light areas around a dark core, whereas the later variants narrowed the light areas step by step down to a mere outline. The difference is clearly visible on a model, which is why the manufacturer offers the individual patterns separately. Always check the form and the dimensions of the cross against photographs or a profile of the particular machine — with insignia of this kind they differed from one example to another and by production plant as well.

Tips for working with the mask

A Balkenkreuz has long straight edges, on which any seepage of paint is noticed at once. Apply the mask, therefore, to fully cured and degreased paintwork, run a blunt tool over the edges and spray thin coats at right angles to the surface. On a two-color cross the light color goes on across the whole area of the insignia first, then the center is masked and the dark infill is sprayed. In 1:72 scale the masks are small, so it pays to work with tweezers and to have a magnifier at hand. Before spraying, check that the cross does not reach onto a rounded edge where the mask would not settle.

Who the set is for

  • Builders of German aircraft of the Second World War in 1:72 scale
  • Modelers who want a sharp insignia with no carrier film
  • Builds with a matte surface where decals silver
  • Those who want to weather, sand or partly overspray the insignia

The package holds masks only. The model, paints and glue are not part of it, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The manufacturer divided the early pattern of the cross into several separate sets and offers the first part separately. The range of sizes in this part is given by the illustration of the set on the packaging.

Not for the national cross itself, which is sprayed. The set does not deal with the other markings, such as codes, technical stencils or unit badges.

Yes, they are cut exactly to scale. We recommend working with tweezers, measuring the placement in advance and pressing the edges of the mask down carefully.

Last seen

ArmycastACM730311:72

1:72 Luftwaffe Balkenkreuze Early - Part II

Luftwaffe Balkenkreuze Early — Part II 1:72 is a set of self-adhesive masks for spraying German national crosses in the early pattern. It is the second part of a series, that is, an accessory for painting, not a model.
In stock
6.76 €
QuickwheelQW-1821:35

1:35 StuG. III - Bronco CB35118, CB35117, CB35116

The Quickwheel 1:35 StuG III masking set is for the road wheels of the German assault gun. It separates the rubber tire band from the rim and replaces lining with a brush.
In stock
8.76 €
Dead DesignNM481711:48

1:48 F-4 C/D Phantom II - wheels and canopy frame paint mask

1:48 F-4 C/D Phantom II, wheels and canopy frames . Besides the framing of the cockpit it also contains pieces for spraying the hubs separately.
In stock
7.96 €
IBG modelsIBG350441:35

1:35 Chevrolet Field Artillery Tractor (FAT-4)

Chevrolet Field Artillery Tractor (FAT-4) in 1:35 scale from the Polish brand IBG Models is a plastic kit of the Canadian field artillery tractor built on the CMP chassis.
In stock
30.76 €
Yamamoto Model PartsYMPRIM21:24

1:24 Rims ENKEI RPF1 16 "+ ADAPTERS

Enkei RPF1 rims in the 16 inch form with adapters, 1:24 scale from Yamamoto Model Parts are replacement wheels for car kits. It is not a kit of a car but an accessory to be built into a model.
In stock
10.76 €
FujimiFU039511:24

1:24 Toyota Crown 2000 Turbo (S110)

Toyota Crown 2000 Turbo (S110) in 1:24 scale: a plastic kit of the Japanese representative sedan of the early 1980s from Fujimi.
In stock
31.96 €
ETA dioramaETA13821:24

1:24/1:32/1:35 Old Black & White Daring Posters

1:24/1:32/1:35 Old Black and White Daring Posters is a printed paper sheet with period black-and-white posters for dioramas. It is an accessory for a scene, not a kit and not a decal, and a subject intended for adult collectors; the sheet covers three scales.
In stock
3.96 €
ReskitRS48-01011:48

1:48 Kh-29T (AS-14B 'Kedge) missile (2 pcs)

Two resin Kh-29T air-to-ground missiles with television guidance in 1:48 scale for Soviet and Russian combat aircraft.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.