1:35 Hanomag SS100 engine deck with canvas cover

1:35 Hanomag SS100 engine deck with canvas cover

11.56 €
Add to Cart

1:35 Hanomag SS100 engine deck with canvas cover

An engine cover with a canvas for the Hanomag SS100 in 1:35 scale is a resin accessory from PANZER ART. It replaces the plastic hood of the model with a variant covered in tarpaulin.

Scale1:35
Manufacturer PANZER ART
Product EAN8591111429443

Responsibility details are not available.

11.56 €
9.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Engine cover with a canvas for the Hanomag SS100 1:35 (PANZER ART)

This is not a kit of the tractor but a resin accessory that replaces the engine section of the model with a variant covered by a canvas. The casting captures the sag of the cloth, the lashing straps and the folds where the canvas lies against the metal. It is exactly these soft shapes that are difficult for injection molded plastic, because a mold does not allow undercuts. The set is therefore a typical means of turning an ordinary kit into a vehicle with a clear story.

The real subject

The Hanomag SS100 was a German heavy road tractor with a hooded layout, used in civilian and in military service. It was a powerful vehicle meant for hauling heavy semi-trailers and trailers, among other things in the role of an airfield tug. A canvas over the engine section was a practical measure in cold weather, when it helped keep the operating temperature of the engine and protected the unit from snow and rain. On a model, this accessory therefore also anchors the scene in time and climate.

Building and painting tips

Wash the casting in warm water with dish soap and separate the casting block with a saw rather than by snapping. Level the mating surface on abrasive paper laid on a flat board, so that the part does not rock on the model. It is glued with super glue, or with epoxy where you need time to set it in place. Apply a primer before painting. Tarpaulin looks good when it is not painted in the same shade as the metal but a little grayer and more matte, because cloth reflects light differently. Bring out the folds with a dark wash and go over the edges with a dry brush in a lighter tone. Add any worn or soiled areas sparingly, otherwise the model quickly loses legibility.

Who the accessory is for

  • Builders of German wheeled vehicles of the Second World War in 1:35
  • Modelers of winter and autumn dioramas
  • Those who want soft cloth shapes on a model that are out of reach in plastic
  • More experienced modelers working with resin

The accessory is supplied unassembled and unpainted, as a resin casting. The base model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a separate resin accessory that is fitted onto a model already built or part-built.

Replacement covers are usually seated in place of the original plastic part, so expect some fitting and sanding.

Choose a noticeably more matte and slightly grayer tone for the cloth, add a dark wash in the folds and a dry brush on the edges. The difference in gloss does more than the difference in shade.

In cold and damp weather the canvas helped keep the operating temperature of the engine and protected it from snow and rain.

Last seen

PANZER ARTRE35-5551:35

1:35 Hanomag SS100 engine deck with canvas cover

An engine cover with a canvas for the Hanomag SS100 in 1:35 scale is a resin accessory from PANZER ART. It replaces the plastic hood of the model with a variant covered in tarpaulin.
In stock
11.56 €
AiresAIR22721:32

1:32 Panavia Tornado GR.1/ECR/IDS wheel bay

Panavia Tornado GR.1/ECR/IDS wheel bays in 1:32 from Aires are a resin detail set for experienced modelers, not a model of the aircraft.
In stock
52 €
Art ScaleASKA320121:32

1:32 Turnbuckles 50 pc. - half and half 7,5mm - 1,1mm / 7,0mm - 1,0mm

1:32 Turnbuckles 50 pc. - half and half 7.5 mm - 1.1 mm / 7.0 mm - 1.0 mm is a set of miniature turnbuckles for bracing wires in two sizes for models in 1:32 scale.
In stock
9.96 €
SX-ArtSXA360031:335

1:335 35 Imitation of BMP-1/BMP-2 inspection devices (Zvezda) Transparent

Clear imitations of vision blocks and observation devices for models of the BMP-1 and the BMP-2 in 1:35, prepared for Zvezda kits.
In stock
4.76 €
FujimiFU433671:700

1:700 Ijn Battleship Yamato 1941

A plastic model of the Japanese battleship Yamato in 1:700 scale, in her 1941 form. The finished model measures about thirty-seven centimeters in length.
In stock
40.76 €
SX-ArtSXA790091:72

1:72 Milk flask 40 liters (10 pcs.)

Ten milk cans of 40 liters in 1:72 scale from SX-Art. A load and a prop for scenes around a model.
In stock
9.16 €
DecalcasDCL-PAR1191:24

1:24 Battery master switch - Type 3

Decalcas Battery master switch - Type 3 (1:24) is a resin accessory made by 3D printing that reproduces the electrical master switch of racing cars.
In stock
6.76 €
Black Dog modelBDF350161:35

1:35 Canadian soldier in Afganistan N°1

A figure of a Canadian soldier from service in Afghanistan in 1:35 scale, the first variant in a range of modern infantry figures.
In stock
14.36 €
GaahleriGAA-41338

Spring Sleeve for Swallowtail

A replacement return spring sleeve for the Gaahleri airbrushes of the Swallowtail line. It gives the trigger back a smooth return action at the moment the original part wears out or dried binder clogs it.
In stock
7.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.