New Ware 1:48 F-4G Phantom II Wild Weasel V ADVANCED kabuki masks is the middle grade of a masking set in kabuki paper for an F-4G model in 1:48 scale - a wider reach than BASIC. It is not a kit but an accessory for painting.
Responsibility details are not available.
A masking set in kabuki paper for an F-4G Phantom II Wild Weasel V model in 1:48 scale. It is not a model of an airplane but an accessory for the painting stage. The templates, cut to the outline, are stuck onto the clear parts and once sprayed they leave frames with a sharp edge and the glass clean. The ADVANCED grade lies between the basic and the most comprehensive one: it offers a wider reach than BASIC without the maximum scope.
The BASIC, ADVANCED and EXPERT grades
New Ware grades its masking sets by scope. BASIC is the basic grade with the smallest scope, aimed at the glazing. ADVANCED has a wider reach. EXPERT is the most comprehensive and is aimed at modelers who want to spray even the small details instead of brushing them. The grades are not combined - a higher one usually covers the scope of the lower one as well, so one set is bought according to the level of detail required.
The McDonnell Douglas F-4G Phantom II Wild Weasel V is a two-seat version of the Phantom adapted for suppressing ground radar defenses. It came about by converting F-4E airframes and carries equipment for finding sources of radar emission, with antennas in the nose and in a pod on top of the vertical tail. The tandem cockpit has a multi-part canopy, so masking the glazing is a longer job here than on single-seat aircraft.
Kabuki paper is soft and its adhesive has low tack, so a mask follows curved shapes and leaves no residue on the plastic once it is removed. Degrease the clear part beforehand and let it dry. Lift the template with tweezers, offer it up to the glass and press it down from the center outward with a soft stick; press the edges at the frames especially carefully, because that is where the paint seeps most often. Cover the rest of the glazing with masking tape and trim any surplus paper with a new blade on a mat rather than on the clear part. Spray thin coats and keep the gun perpendicular to the mask rather than at an angle under it; the first coat belongs to the shade of the cockpit interior. Take the masks off while they are still fresh, pulling back over themselves at a sharp angle.
The set contains masking templates only. The kit, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
