29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:144 RAF SEAC roundels 1942-46

Mark I 1:144 RAF roundels for South East Asia 1942–1946 is a sheet of wet decals with national insignia in the rendering used on the South East Asian front. An accessory for models in 1:144 scale.

Scale1:144
Manufacturer Mark I
Product EAN8591111000000

Responsibility details are not available.

2.36 €
1.95 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Mark I 1:144 decals — RAF roundels for South East Asia 1942 to 1946

A sheet of wet decals in 1:144 scale with British national roundels in the form used on the South East Asian front in the years 1942 to 1946. These are not the ordinary European rendering: in that theater the red center was left out of the roundel so that it could not be mistaken at a distance for the enemy's national insignia. It is precisely this detail that makes the set a product in its own right, which ordinary British sheets cannot replace. The dimensions and the number of pieces are stated on the box.

Why a separate sheet for one theater

Aircraft deployed in India, Burma and over the Indian Ocean wore the altered markings for the whole time the fighting lasted in the area, and the difference is immediately noticeable on a model — a blue and white roundel looks different from the three-layer European one. Anyone building a British machine from this theater usually cannot use the insignia from a kit. At the same time the set is not tied to one type of aircraft: in that theater British and American designs alike served in British colors.

How to apply the decals

The decals are applied by the wet method. The surface beneath has to be smooth and glossy — on matte paint a visible silvery veil will stay under the film. Cut the insignia out as closely as possible, dip it in lukewarm water for a few seconds, let it rest until the film releases and slide it onto the moistened place. Adjust the position with a brush, draw the excess water off with a cloth and use a softener so that the decal draws down onto the rivets and engraved lines. Once dry, go over the surface with a matte or semi-matte varnish, which hides the edges of the film. In 1:144 scale the insignia are very small, so work with smooth-jawed tweezers and preferably one piece at a time.

Who the set is for

  • Builders of British aircraft from South East Asia in 1:144 scale
  • Modelers who need roundels without the red center
  • Anyone interested in building from a particular period photograph
  • Collectors of national insignia sheets for small scales

This is an accessory for a model, not a kit. The model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

In South East Asia the red center was left out of the roundel, so that it could not be mistaken for the enemy's national insignia. The result is a blue and white rendering.

The number of roundels and their dimensions are stated on the box. Check the contents against it before you buy.

It is not tied to one type. It can be used on models of British units operating in that theater in the period given.

By the wet method onto a smooth gloss surface, using a softener and with a final matte or semi-matte varnish over the whole surface.

Last seen

Mark IDMK144551:144

1:144 RAF SEAC roundels 1942-46

Mark I 1:144 RAF roundels for South East Asia 1942–1946 is a sheet of wet decals with national insignia in the rendering used on the South East Asian front. An accessory for models in 1:144 scale.
In stock
2.36 €
1:72 B-26 (A-26) Invader wheels set type 1-25 %Stock ClearanceFavorite
ReskitRS72-02601:72

1:72 B-26 (A-26) Invader wheels set type 1

Reskit 1:72 B-26 (A-26) Invader — wheel set, type 1 is a resin replacement for the landing gear wheels of a model of the twin-engine bomber.
2 leftof 6
7.96 €5.96 € You save 2 €
TrumpeterTR028701:48

1:48 TA-3B Skywarrior Strategic Bomber

Douglas TA-3B Skywarrior 1:48 from Trumpeter — an injection-molded plastic kit of the training version of the large American carrier aircraft.
In stock
46.36 €
BANON DESIGNBAN005-05

BAN005 torx convex head Ducati 0,5mm

Miniature screw heads with a convex shape and a star-shaped torx profile, a marked size of 0.5 mm, in a version after Ducati motorcycles.
In stock
10.36 €
TrumpeterTR022641:32

1:32 P-47D Thunderbolt Dorsal Fin

A large injection-molded plastic kit of the Republic P-47D Thunderbolt (Dorsal Fin) in 1:32 scale from Trumpeter, the American fighter with a dorsal fin ahead of the vertical tail.
In stock
35.56 €
Aires/QuickboostQB724611:72

1:72 Douglas C-47 Skytrain air intakes

A resin accessory, Quickboost Douglas C-47 Skytrain air intakes 1:72 — one-piece replacement engine air intakes for advanced modelers. It is not a model but a detail part.
In stock
6.36 €
MAiMMAIM241121:24

1:24 Ventilation Shaft - (small Version 27x27mm)

Ventilation shaft, small version 27x27 mm (1:24, MAiM) is a resin diorama accessory. It is not a figure or a vehicle.
In stock
12.76 €
Model SceneVG3-0061:32

1:32/1:35 Jelení jazyk

The 1:32/1:35 Hart's Tongue Fern is laser-cut low vegetation in fine paper imitating the hart's tongue fern, a scenic accessory for dioramas in 1:32 and 1:35 scale.
In stock
5.16 €
QuickwheelQW-0621:35

1:35 CA L6/40 - Italeri

The 1:35 Carro Armato L6/40 wheel masking set from the Quickwheel company covers the disk of a road wheel, so that you spray the rubber separately and without drawing around with a brush. The cut-outs are cut for the wheels from the kit of the Italeri company.
In stock
6.60 €
PlusmodelPMO561

Olověné drátky půlkulaté 1,0 mm

Half-round lead wires 1.0 mm from Plusmodel are soft, shapeable wires with a half-round (D) profile for making heavier piping, hoses and lines on models and dioramas.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.