Wheels for the Jeep Willys in 1:16 scale bring resin wheels of the light utility vehicle with a modeled weighted contact patch.
Responsibility details are not available.
A resin set of wheels for the four-wheel-drive Willys MB, that is, a light utility vehicle with a quarter-ton payload, including the spare for the rear panel. The tires have a modeled weighted contact patch, so the finished vehicle does not look as if it were floating above its base.
The Willys MB was a small four-wheel-drive cross-country car whose development the US Army ordered at the turn of the 1930s and 1940s. The result was a machine without anything superfluous: a short wheelbase, a folding windshield, a canvas roof and drive to both axles. Several hundred thousand were built and it served absolutely everywhere, from the coast of Normandy to Burma, as a liaison vehicle, an ambulance, a tractor for light guns and an improvised weapons platform. After the war a whole civilian class of cross-country cars grew out of it. One of its characteristic features was the coarse cross-country tire with a chevron tread.
Rinse the castings, remove the casting blocks and level the surface; cover your airways when sanding. Glue the wheels on with cyanoacrylate glue and watch that the sagged area stands on the ground. The chevron tread will stand out after a dry brush in a lighter shade and after dusting with pigment; the spare at the rear tends to be less dirty than the wheels on the axles, which is a small thing the eye notices on a large model.
You get the wheels unpainted, and glue and paints do not belong with them, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
