1:16 firefighter with a nozzle 1983 is an MN-hobby figure in 1:16 scale depicting a firefighter with a nozzle as he looked in 1983.
Responsibility details are not available.
The figure captures a firefighter in action with a fire nozzle, that is with the end fitting of a hose by which the jet of water is directed. The subject comes from 1983 and belongs to the range of Czech themes from the MN-hobby brand. The nozzle he holds sets the stance of the whole figure, which makes it a rewarding center for a smaller setting.
An incident setting does not need much: a piece of roadway or yard, a hose running from the edge of the base and ideally a model of firefighting vehicles in the same scale. The hose can be suggested with a suitably shaped piece of string or wire with a surface finish; more important than the material is a natural sag. It is better not to model the jet of water unless you are sure of yourself; a failed effect draws more attention than the figure itself.
Turnout gear is rewarding in that it is made up of several large areas between which contrast can be worked. Set the helmet apart with a different sheen and bring out the edge of its brim, so that the figure does not look flat. Keep the soiling near the ground, that is on the footwear and the lower part of the trouser legs, and let it thin out upward. A wet look on part of the gear can be suggested with a spot satin varnish, but carefully and only in places the water would really reach. The metal parts of the fitting on the contrary will take a distinct sheen, so that they are set apart from the textile surface of the gear.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
