A set of painting masks for the SBD-1/2 Dauntless in 1:32 from Eduard. It is a modeling accessory for masking the canopy glazing and the wheels, not the model itself.
Responsibility details are not available.
Precisely cut painting masks from Eduard in 1:32, made for the SBD-1/2 Dauntless type. The masks are of thin kabuki paper with a low-tack adhesive; they follow the shape of the framing of the canopy and of the other glazed areas, and on aircraft sets usually the wheel hubs as well. It is neither a kit nor parts of a model but an accessory obtained separately alongside the base model.
The Douglas SBD Dauntless was an American carrier dive bomber of the Second World War. Versions 1 and 2 belonged to the early series of this successful aircraft, which played a decisive part in the naval battles of the Pacific. The Dauntless was valued for its toughness and its accuracy in dive bombing.
Peel the mask carefully off the backing, lay it on the clean glazed surface and press it down. Fill the straight gaps between the frames with a strip of masking tape or with liquid mask. Then spray the shade of the frame, let it dry and remove the masks while the paint is still fresh, so that the edges stay sharp. The masks speed masking up markedly and give clean, accurate framing lines with no lengthy measuring of tape.
The masks are a modeling accessory, not a model. The kit itself, the paints and the glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
