1:32 Stearman PT-17 Kaydet 2 canopy masks (interior and exterior canopy masks) + 2 insignia masks

1:32 Stearman PT-17 Kaydet 2 canopy masks (interior and exterior canopy masks) + 2 insignia masks

9.96 €
Add to Cart

1:32 Stearman PT-17 Kaydet 2 canopy masks (interior and exterior canopy masks) + 2 insignia masks

Montex 1:32 Stearman PT-17 Kaydet is a set of self-adhesive masks for the glazed parts of a model, from the outer and the inner side, supplemented with two masks for the national insignia. It is not a kit but an accessory for painting.

Scale1:32
Manufacturer Montex
Product EAN8591111000000

Responsibility details are not available.

9.96 €
8.23 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Montex masking set 1:32 Stearman PT-17 Kaydet

A set of self-adhesive masks for painting the glazed parts of a model of the Stearman PT-17 Kaydet trainer biplane in 1:32 scale. According to the name it contains masks for two glazed areas, separately for the outer and separately for the inner side, and in addition two masks for the national insignia. It is neither a kit nor a part of a model but an aid thanks to which both the framing and the markings can be sprayed instead of being laboriously gone over with a brush. The maker of the set is Montex.

The real subject

The Stearman PT-17 Kaydet was an American trainer biplane with a radial engine, a fixed landing gear and two cockpits placed one behind the other. It was built in large numbers as a basic training machine, and after the end of its service hundreds of aircraft went into civil use, where they flew in agriculture and at air displays. The cockpits are not covered by a continuous canopy, so the glazing makes up only small areas, but every inaccurate paint edge shows on them all the more.

Usage tips

Wash the glazed parts first in lukewarm water with a drop of dish soap and let them dry freely, so that the mask will hold. Lift it off the sheet with a sharp point or with tweezers, seat it dry first and only then press the edges down. It has proved itself to go over the edges of the mask with a thin coat of clear or of the base color of the model, which runs into any gap and seals it. Spray the paint thinly and rather in several passes. Take the masks off shortly after drying, while the paint is still flexible. Apply the masks for the national insignia only onto a finished and sanded base, so that they have a sharp edge, and spray over them in as thin a coat as possible.

Who the set is for

  • Builders of the Stearman PT-17 model in 1:32 scale
  • Modelers who want to spray the markings rather than apply decals
  • Those who paint with an airbrush and need sharp edges with no creeping
  • Modelers who do not manage clean masking with ordinary tape

This is an accessory for painting, not a kit. The model, paints and glue are not included in the package. Before buying, check that the set matches the kit you are building.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. This is purely a set of self-adhesive masks for painting. The model, paints and glue are not part of it.

You spray the markings with paint instead of applying decals. The carrier film falls away, so the insignia has no visible edge and does not silver.

The frames are visible from both sides. Spraying the inner side too gives a noticeably more believable result once assembled.

The masks are cut to the shape of a particular model. The target kit is not stated here, so check that it matches beforehand.

Last seen

MontexMXMM321891:32

1:32 Stearman PT-17 Kaydet 2 canopy masks (interior and exterior canopy masks) + 2 insignia masks

Montex 1:32 Stearman PT-17 Kaydet is a set of self-adhesive masks for the glazed parts of a model, from the outer and the inner side, supplemented with two masks for the national insignia. It is not a kit but an accessory for painting.
In stock
9.96 €
1:72 F-15J Eagle `Komatsu Special Marking 2018` w/High Details Nozzle Parts-25 %Stock ClearanceFavorite
HasegawaHA022991:72

1:72 F-15J Eagle `Komatsu Special Marking 2018` w/High Details Nozzle Parts

F-15J Eagle Komatsu Special Marking 2018 1:72 : a kit of the Japanese fighter in a special livery, completed by detailed engine nozzle parts, from Hasegawa.
Last one!of 2
43.96 €32.96 € You save 11 €
Artwox ModelAM200341:700

1:700 Japanese Navy Battleship Hiei next 006 Deck Masking Sheet for Fujimi kit #460079

Masking sheets for the deck of the battleship Hiei in 1:700 scale from Artwox Model let you spray the deck without overlapping onto the surrounding surfaces. This is an accessory for the Fujimi 460079 kit, not a model.
In stock
6.36 €
Quinta StudioQD322971:32

1:32 Eurofighter Typhoon Twin-seater (Powered-up Displays) 3D-Printed & coloured Interior on decal paper (Trumpeter)

Eurofighter Typhoon twin-seater (Powered-up Displays), a 3D-printed colored interior (Quinta Studio, 1:32) is a set of pre-colored 3D-printed cockpit parts on a decal backing with the displays printed as lit. It is not a model but an accessory for the Trumpeter kit.
In stock
43.96 €
ReskitRSU48-06131:48

1:48 F-16 Fighting Falcon (F100-PW-229) open exhaust nozzle for Tamiya kit

A detailed open exhaust nozzle of the F100-PW-229 engine for the F-16 in 1:48 scale from Reskit. It is a resin accessory for refining a kit, not an aircraft model. It fits the Tamiya kit.
In stock
17.96 €
AberABR160491:16

1:16 Fenders set for Pz.Kpfw. 38 (t) Ausf. E/F vol.2

Aber 1:16 Pz.Kpfw. 38(t) Ausf. E/F – fenders (vol.2) is a photo-etched detail set of fenders for a large scale model of the German Pz.Kpfw. 38(t) light tank.
In stock
47.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.