Masks for the Messerschmitt Bf 109G-6 in 1:35, double-sided version are pre-cut self-adhesive painting masks from Art Scale. They serve for spraying the canopy framing of the Border Model kit sharply, outside and inside; it is not a model or parts.
Responsibility details are not available.
Pre-cut self-adhesive painting masks in 1:35 scale from Art Scale. These are not a kit or spare parts but an aid for painting: you stick the masks onto the clear parts, they cover the transparent areas and expose only the cockpit framing, which you then spray together with the airframe. The double-sided version allows for masking the glazing from the outside and from the inside, so you paint the framing from inside the cockpit as well. The 1:35 scale is less usual for an aircraft model, but for this subject it corresponds to the Border Model kit, for which the set is cut. With a kit of other origin, therefore, test the fit dry first.
The Messerschmitt Bf 109G-6 was the most numerously built version of the G series of the German single-seat fighter, with a Daimler-Benz DB 605 engine. Its distinguishing features are the fairings over the gun breeches above the forward fuselage, which broke the previously smooth line of the cowling. The cockpit consists of a fixed front section with a flat panel, a hinged center canopy and the rear glazing. The frames are narrow and irregular, so hand-cut tape rarely holds a straight line on them.
Before sticking the masks on, wash the clear parts in lukewarm water with detergent and let them dry thoroughly. Pop the masks out of the sheet with the tip of a scalpel and carry them with tweezers, not with your fingers. Stick the inner masks on before you fit the canopy to the fuselage. Press each mask from the center toward the edges and smooth the edge down with a toothpick so that no paint runs under it. If the shape does not sit quite precisely, trim the outline with a fresh blade right on the part. Spray thin coats at right angles to the surface, first the interior shade, then the primer and the camouflage. Lift the mask as soon as the paint has flashed off, pulling it back at an angle over itself.
The masks are an aid for painting, not a kit or spare parts. The kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!