A set of 3D-printed radio equipment parts for the Sd.Kfz. 251/1 Ausf. C model in 1:35 scale from the Czech manufacturer Eduard. It is an interior accessory, not a vehicle model.
Responsibility details are not available.
A set of accurate 3D-printed parts of the radio equipment intended for the interior of a model of the German Sd.Kfz. 251/1 armored half-track personnel carrier in the Ausf. C version, in 1:35 scale. It is not a kit of the vehicle but an accessory for a model you already have. The 3D printing technology allows finer detail than can be produced in injection-molded plastic, and on the instruments, controls and brackets that shows at first glance. Check the exact number of parts and the color finish against the information on the packaging.
The Sd.Kfz. 251 was a German armored half-track personnel carrier of the Second World War; the /1 version was the basic transport variant for an infantry squad. The Ausf. C is the third production version, recognizable among other things by its one-piece front armor plate. The vehicles carried a radio set with the matching brackets and wiring in the fighting compartment, so it is visible on a build with an open hull. That is exactly why it pays to work up the interior on this type: the model cannot be closed up, and the empty space where the radio set should be is obvious at first glance.
First rinse the 3D-printed parts in lukewarm soapy water and let them dry: production residue would keep the paint from adhering. Cut the supports off with a sharp scalpel or a fine saw, never break them off. The material is hard and brittle, so sand with fine paper and preferably wet, so that no dust is stirred up. They are bonded with cyanoacrylate glue (super glue); cement for plastic will not join this material. Apply a primer before painting. Paint and weather the interior before you fit the upper parts and the equipment to the model.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
