Photo-etched steel seat belts for a model of the Boeing B-17F Flying Fortress bomber in 1:48 scale.
Responsibility details are not available.
Seat belts for a model of the four-engined B-17F Flying Fortress bomber in 1:48 scale. The word STEEL in the name sets the material: the belts are etched from steel. How many parts the package holds, which seats they belong to and whether they come in a color finish is given in the enclosed manufacturer's instructions.
Seats in kits tend to have the belts only suggested in relief, or not at all. A metal belt, by contrast, is thin, can be bent over the edge of the cushion and left hanging loose, so the interior stops looking empty. On a bomber that shows twice over, because its inside is accessible from several places at once.
Separate the parts from the fret with a sharp blade on a hard surface and sand the burrs away. Shape them gradually with flat-jawed tweezers, bend by bend. They are glued with cyanoacrylate glue applied in a tiny amount. Seat the belts before you close the fuselage, because the seats are out of reach later. Before any painting, wash and degrease the surface and spray it with a primer.
The set is meant for a modeler building the B-17F with open compartments who wants the interior taken all the way. Check in the instructions which 1:48 kit it is developed for. The kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
