1:48 F-4B 3D-Printed and coloured Interior on decal paper

Quinta Studio F-4B Phantom II 1:48, colored 3D interior

This set is NOT an aircraft kit but an interior detail accessory. It consists of 3D printed and fully pre-colored cockpit parts on decal paper that replace the flat pieces from a plastic kit and give the pilot's station depth and color without painting.

How the set works

• It combines the simplicity of a decal with three-dimensional 3D relief.
• It typically contains the instrument panels, the side consoles and other features of both cockpits.
• The shaded colored parts cut the work on the interior to a minimum.

Application tips

• Cut the parts out, dip them in lukewarm water for about fifteen seconds and slide them off the backing paper onto a clean, degreased surface coated with gloss varnish.
• Do not use a decal softener or a setting solution at all, as they would attack the printed resin and deform the relief.
• We recommend a gentle wash to bring out the instruments.

Who it is for

• Modelers building the Phantom II in 1:48 scale.
• Anyone interested in a maximally detailed cockpit without lengthy painting.

This is an accessory for more experienced modelers. The kit, glue and paints are not included in the package.