1:48 F-4B/N Phantom II (for Academy kit)

1:48 F-4B/N Phantom II is a 3D printed and pre-painted set of cockpit panels on decal paper from Red Fox Studio. An accessory for a kit in 1:48 scale. The set is cut for the Academy kit.

Scale1:48
Manufacturer Red Fox Studio
Product EAN8591111000000

Responsibility details are not available.

17.16 €
14.18 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

F-4B and F-4N Phantom II cockpit panels in 1:48 scale from Red Fox Studio

The set brings 3D printed and already painted instrument panels of both stations of the two-seat carrier-based fighter. Everything is on decal paper, so the parts are applied like a decal, with no gluing and no painting of dial faces. It is not an aircraft kit but an accessory for a model in 1:48 scale. The accessory is designed for the Academy kit.

Two entirely different workstations

The Phantom has a tandem cockpit in which the front and rear stations are not variants of the same thing but two different workstations. In front sits the pilot with the full flight and engine suite of analog instruments and with optics above the panel; at the rear the systems operator, whose panel is built around the radar scope and control boxes, while he has only a limited set of flight dials. The B and N standards belong to the early naval machines, whose cockpit is still fully analog. The long canopy swings open in two pieces, so with the model open both panels are visible at once and their difference is the main point of the interior.

Scale 1:48 calls for precision

In 1:48 scale the parts are markedly smaller than in the large scales, and the work is worth doing under a magnifier or with good lighting. Guide the trim with a sharp new blade close to the edge of the print so that no light rim is left. Use little water, because at a small size a soaked part folds over easily. Seat it on a smooth glossy base, fine-tune the position with a soft brush and blot away the excess moisture. Fixing with a thin layer of matte clear coat will protect the panel during further assembly.

Who the set is for

  • For builders of the early naval versions of the Phantom in 1:48 scale
  • For modelers who want to tell the pilot and the rear station apart
  • For those who build the model with the canopy swung open
  • As a faster route to a detailed cockpit than assembling photo-etched panels

The accessory is supplied without the kit, paints and glue. Check the fit with your kit in 1:48 scale beforehand.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Sets of this type are made for a tandem arrangement with two different stations. An exact list of the parts is not stated here; you will find it in the manufacturer's instructions.

The parts are smaller, so a magnifier, a new blade and a small amount of water pay off. The procedure is otherwise the same as in the larger scales.

It is cut for the B and N standards. Later versions have differently equipped cockpits, so do not use the set on them.

Last seen

Red Fox StudioRFSQS-480211:48

1:48 F-4B/N Phantom II (for Academy kit)

1:48 F-4B/N Phantom II is a 3D printed and pre-painted set of cockpit panels on decal paper from Red Fox Studio. An accessory for a kit in 1:48 scale. The set is cut for the Academy kit.
In stock
17.16 €
SBS ModelSBS350091:35

1:35 Zrínyi assault gun roadwheels set

A resin Zrinyi assault gun roadwheels set in 1:35 scale from SBS Model. Replacement road wheels for a plastic model of the Hungarian Zrinyi assault gun.
In stock
17.16 €
Quinta StudioQD721711:72

1:72 A6M3 Zero 3D-Printed & coloured Interior on decal paper (Tamiya)

Quinta Studio 1:72 Mitsubishi A6M3 Zero 3D interior decal is a color 3D decal of the cockpit on a decal backing paper; after a brief soak it slides onto the part.
In stock
5.96 €
EduardFE12391:48

1:48 Grumman F-14A Tomcat late

An Eduard photo-etched accessory set for a model of the Grumman F-14A Tomcat in the late guise, 1:48 scale. An accessory to a kit, not a model of the aircraft in its own right.
In stock
15.80 €
Special HobbySH724671:72

1:72 DB-7 Havoc Mk.I ‘Intruders’

DB-7 Havoc Mk.I 1:72 from Special Hobby: a plastic kit of the night intruder aircraft with four color schemes.
In stock
25.96 €
HaulerHLU350301:35

1:35 AUTOBLINDA AB41 (ITALERI)

Hauler 1:35 Autoblinda AB 41 is a photo-etched accessory set for a kit of this Italian armored car you have already bought, not a model in its own right. It brings thin grilles, fenders and fittings at a thickness correct for the scale. The target kit is from Italeri.
In stock
15.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.