SB2U Vindicator masks 1:48 is a set of painting masks from the Czech maker Eduard for masking the glazed cockpit and other items of a model of this type.
Responsibility details are not available.
A set of pre-cut painting masks from the Czech maker Eduard in 1:48 scale for the American Vought SB2U Vindicator carrier-based bomber. The masks serve for accurate masking of the frames of the glazed cockpit and usually the wheels as well while spraying. This is an accessory for a build, not a model.
The Vought SB2U Vindicator was an American carrier-based and dive bomber aircraft from the turn of the 1930s and 1940s. It was deployed with the navy at the start of the war in the Pacific, at the Battle of Midway among other places.
The masks are laid adhesive side down directly onto the clean, degreased cockpit glazing and the other items of the model to be masked, the edges are pressed down carefully and the areas between them are covered with tape or with masking fluid. The framing is then sprayed in the airframe color and once dry the masks are carefully taken off. The pre-cut shape matches the subdivision of the cockpit, so laborious cutting of tape with a knife is not needed. The masks are intended for the given aircraft type; the particular kit has to be obtained separately.
Painting masks are not a model. The aircraft kit itself has to be obtained separately; masks, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
