1:48 Tempest Mk.II roundels

Tempest Mk.II roundels 1:48 is a decal set from Eduard with national roundel markings for a Hawker Tempest Mk.II model.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

6.80 € 5.12 €
4.23 € without VAT
−25 % You save 1.68 €
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Tempest Mk.II roundels 1:48 — Eduard decals

This is not a kit but a separate decal sheet in 1:48 scale from the Czech manufacturer Eduard of Obrnice near Most. The set is aimed at the national circular markings, the so-called roundels, for a Hawker Tempest Mk.II model. Separate sheets of national markings are popular in modeling practice because the decals enclosed with kits tend to be less saturated, to settle less well into engraving, or to have gone yellow and brittle after years in storage. The exact number and size of the individual markings on the sheet is not stated here, so check before buying that the sheet will cover the scheme you want to build.

The real subject

The Hawker Tempest Mk.II differed from the better-known Mk.V version in its powerplant — instead of a liquid-cooled H-block engine it received a radial engine, which fundamentally changed the shape of the front fuselage. It reached series production only at the very end of the Second World War, so it lived out its operational career mainly after 1945. It served with the Royal Air Force outside Europe and later entered the armament of other users as well. It is precisely that postwar service which means that several different forms of national markings meet on it.

Usage tips

Apply the decals onto a smooth glossy surface; a matte surface under a decal creates silvery edges. Cut the sheet as close around the motif as possible. Dip the decal in water for only a few seconds and let it rest on a paper towel until the backing can be slid. Fine-tune the seating with a decal softener and press the excess water out with a cotton bud from the center to the edges. Once it has dried, varnish the whole model so that the edges of the decals are sealed, and only then apply the matte or semi-gloss final varnish.

Who the set is for

  • Modelers building the Hawker Tempest Mk.II in 1:48 scale
  • Those interested in replacing faded or damaged decals from an old kit
  • Builders who combine markings from several sources to match a particular photograph
  • Modelers who want more saturated and more precisely printed national markings

This is a decal set, not a kit. The model, paints and a decal softener are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is only a sheet of decals. The Tempest Mk.II kit has to be obtained separately.

The exact contents of the sheet are not stated here. Check whether it covers the scheme you want to build.

Decals in older kits tend to be yellowed, brittle or less saturated. A separate sheet is usually printed more sharply and is thinner.

Onto a glossy surface; after resting in water slide them off the backing, settle them with a decal softener and varnish over once dry.

Last seen

1:48 Tempest Mk.II roundels-25 %Stock ClearanceFavorite
EduardEDD480871:48

1:48 Tempest Mk.II roundels

Tempest Mk.II roundels 1:48 is a decal set from Eduard with national roundel markings for a Hawker Tempest Mk.II model.
2 leftof 3
6.80 €5.12 € You save 1.68 €
TamiyaTA81705

XF-5 Flat Green 10ml

Tamiya XF-5 Flat Green is a matte opaque water-based acrylic paint in a 10 ml package, suitable for brush and airbrush.
In stock
2.20 €
Mr.PaintMRPC012

Gray carbon brake

Gray carbon brake is a lacquer modeling paint ready for spraying with an airbrush, in a gray shade for brakes and carbon parts.
In stock
5.96 €
Tetra Model WorksTA-00011

Wire E (0.6mm x 1m)

Tetra Wire E (0.6 mm x 1 m) is metal modeling wire 0.6 mm in diameter and 1 meter long. It is not a kit but a material for building and detailing models.
In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.