Nuts with Screw Stem and Washer 1,2 mm (1/48 - 1/35)

Firma49 Nuts with a screw stem and a washer 1.2 mm (resin detail)

The set contains miniature nuts with a screw stem and a washer, cast by high-resolution SLA 3D printing from resin. The head diameter of 1.2 mm suits 1:48 and 1:35 scale. The parts serve to complete bolted and nutted joints faithfully on kits where they are only suggested. Firma49 is a Czech maker of modeling accessories.

Use

• Adding nuts and bolts to fuselages, hatches and technical parts.
• Raising the realism of vehicles, military vehicles and aircraft.
• Replacing the flat, merely suggested detail of a plastic kit.

Work tips

Separate the parts carefully with a sharp scalpel, set them with tweezers and fix them with a drop of super glue (cyanoacrylate). Once dry, spray over them with a primer; the heads come out after gentle highlighting and weathering.

Who it is for

• Modelers who want realistic bolted and nutted joints in 1:48 and 1:35 scale.
• Builders of models detailed beyond the kit.
• Experienced modelers who can handle small resin parts.

The accessory is supplied unpainted. Paints and glue are not included in the package. Sand resin with respiratory protection and use glue in a ventilated space.