Rivets 1.5 mm are a fine 3D-printed accessory from the Czech manufacturer Firma49: a set of pronounced rivets for realistic riveting of larger models.
Responsibility details are not available.
This is a finely 3D-printed accessory from the Czech manufacturer Firma49, not a model on its own. The set contains round-head rivets 1.5 mm in diameter. They are sold by physical size and suit anywhere the rivet is to be pronounced and clearly visible: on large vehicles, ships, structures or in the larger scales.
Separate the individual rivets carefully from the print carrier and fit them with tweezers. For regular spacing it helps to mark the layout out with a pencil or a template. Glue with cyanoacrylate glue. Degrease the surface before painting and apply a primer; then pick the heads out with a wash.
For modelers who want to render pronounced riveting on larger models and structures, where fine rivets would be lost.
The accessory is supplied unpainted. The base model, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
