A masking set for the glazing of the Breguet Bre.693 and Bre.695 in 1:72 scale offers pre-cut templates for clean spraying of the busy glazing of this French attack aircraft.
Responsibility details are not available.
A set of pre-cut masking templates from MH models for the glazed areas of a model of the French twin-engine Breguet Bre.693 attack aircraft and its Bre.695 variant. The glazing of this type is unusually busy: besides the pilot's canopy it also includes the glazing of the nose and the lower observation panels. Masking such an arrangement by hand is slow and the edges tend to be uneven. Pre-cut templates answer that by following the shape of the frames and simply being transferred onto the part.
The Breguet Bre.693 was a French twin-engine attack aircraft intended for strikes on ground targets from low altitude, used at the end of the thirties and in 1940. The design grew out of an original heavy fighter project and put the emphasis on sturdy construction and respectable speed near the ground. The Bre.695 variant differs from the basic version in having the engines replaced with American radials, a step taken because of a shortage of the original powerplants. The difference in the engine nacelles is the most conspicuous external feature of the two versions.
Clean the glazing and try the masks on dry. With busy glazing, work from the largest areas to the small segments, so that the smaller pieces do not get mixed up. Press the edges down carefully, because it is precisely at the transitions between the nose and the canopy glazing that paint creeps in most often. Spray thinly and rather more than once. Remove the masks shortly after the paint has flashed off, ideally by pulling them at a shallow angle.
An accessory for building a model. The kit, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
