A set of photo-etched parts in 1:72 scale for detailing a model of the F-4B or F-4N Phantom II carrier aircraft.
Responsibility details are not available.
The F-4B and F-4N are carrier versions of the two-seat F-4 Phantom II, which served with the US Navy and the Marine Corps. The F-4N version came about by modernizing earlier-built F-4B machines, so both keep the same basic airframe shape and differ mainly in equipment.
Photo-etched parts in 1:72 scale intended for a model of the Phantom in the F-4B or F-4N version. Photo-etched sheet is an order of magnitude thinner than plastic and holds fine shapes that cannot be molded into an injected part, so it replaces simplified items of the kit. A list of the parts and their placement is given in the manufacturer's instructions.
Separate the parts with a sharp blade on a hard surface; do not tear them off the fret, or they will bend. Sand the remains of the tab after separating. Make the folds in a bending tool or between two blades, always in one stroke and on a sharp edge. They are bonded with super glue or a two-part adhesive; cement for polystyrene does not hold on metal. Degrease the sheet before painting and apply a base coat intended for metal, otherwise the paint comes off while the model is handled.
For the modeler who wants to take a Phantom model beyond the level of the kit and does not mind fine work. Besides tweezers and a sharp blade, a magnifier or good light comes in handy; in 1:72 scale some of the parts are really small and easily lost.
The package holds photo-etched parts only. The model, paints and glue are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
