Die-cut self-adhesive painting masks Gloster Meteor FR.Mk.9 1:72 from the Czech manufacturer Eduard. This is not a model — it is an accessory for cleanly painting the glazing and the wheels.
Responsibility details are not available.
A set of precisely die-cut self-adhesive painting masks from the Czech manufacturer Eduard for a model of the British jet aircraft Gloster Meteor FR.Mk.9 in 1:72 scale. This is not a kit and not a model — it is an accessory that makes it easy to cleanly paint the framing of the glazing and the other small areas. The masks stick straight onto the parts, so the glazing frames get sharp, straight edges without laboriously cutting masking tape. Sets of this type usually also include circular masks for the wheel rims, for a clean separation of the tire from the rim.
The Gloster Meteor was the first British operational jet fighter and the only Allied jet fighter to see action in the Second World War. The FR.9 version was a fighter reconnaissance variant with cameras in the nose, meant for daylight reconnaissance. The Meteor served with the RAF and with other air forces long after the war.
Carefully lift the mask off the backing sheet with tweezers or a knife tip and lay it on a dry, degreased glazing surface. Press the edges down firmly so that no paint creeps underneath. Apply the paint in thin coats, ideally with an airbrush, and pull the mask off before the coat dries completely. On strongly curved shapes it helps to seal the edge with masking fluid.
This is a set of painting masks, not a model. The kit, paints and glue are not included.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
