1:72 Mikoyan MiG-21PF

A set of self-adhesive masking templates from Eduard for a model of the MiG-21PF aircraft in 1:72 scale, from the range of masks for glazing, cut to shape in advance and ready to apply.

Scale1:72
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

6 €
4.96 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Masking set for the MiG-21PF, 1:72 scale

This is neither a kit nor decals but a set of pre-cut self-adhesive masks. They are made by the Czech manufacturer Eduard of Obrnice near Most, and this item belongs to the range of masks for 1:72 scale. The masks are die-cut from kabuki paper, that is thin Japanese masking paper with a mild adhesive, which follows a slightly curved surface and does not pull the paint off when it is removed. The purpose of the set is to leave the glazing clean and the frames crisp, without your having to cut around them with a knife on the model itself.

Why a mask and not hand trimming

In 1:72 scale the frames of a canopy are often only a few tenths of a millimeter wide. Cutting them by hand from tape at that width means one twitch destroys the whole job, and painting the frame by hand with a brush gives it an uneven width that draws attention at once on a finished model. A pre-cut mask removes that problem entirely: every piece has the right shape and the right width.

Usage tips

Before masking, simply wash the glazing and never polish it with abrasive compounds. Lift the masks off the sheet with tweezers and press them down around the whole edge with a pointed toothpick, above all in the curves, where the paper tries hardest to lift. Spray a thin coat of the interior color or a base coat first; that seals the edges and stops the final color from seeping under. Apply the paint in several light coats, as a heavy coat creates a step at the edge. Take the masks off while the paint is freshly dry but not fully cured, as no cracks then form at the edge.

Who the set is for

  • Modelers building jet fighters in 1:72 scale
  • Those for whom masking small canopies by hand takes longer than the build itself
  • Modelers airbrushing camouflage, where clean glazing is a condition of a good result
  • Beginners who want to avoid the most common mistake, that is a fogged or overpainted canopy

The set contains masking templates. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. These are only masking templates; the kit has to be owned separately.

Thin Japanese masking paper with a slightly tacky layer. It shapes well into curves and does not pull dried paint off when it is removed.

Press the mask down firmly around its whole edge, spray a thin sealing coat first and only then the final color, in several light passes.

When the paint is dry to the touch but not yet fully cured. Removing it too late can tear the edge of the coat.

Last seen

EduardCX5861:72

1:72 Mikoyan MiG-21PF

A set of self-adhesive masking templates from Eduard for a model of the MiG-21PF aircraft in 1:72 scale , from the range of masks for glazing, cut to shape in advance and ready to apply.
In stock
6 €
Sea King HAS.5 SPACE 1/48-25 %Stock ClearanceFavorite
EduardED3DL481451:48

Sea King HAS.5 SPACE 1/48

A SPACE set in 1:48 scale with colored three-dimensional interior elements for the Sea King HAS.5 helicopter. The elements are not self-adhesive; they are lifted off dampened paper.
2 leftof 4
15 €11.24 € You save 3.76 €
Model CraftPFL6003

Model Craft - Sada pilníků 10ks

A set of ten Model Craft modeling files for fine-tuning the shape of parts and cleaning up joints. The profiles and the coarseness of the cut are given on the packaging of the set.
In stock
11.96 €
Yahu ModelsYMA48781:48

1:48 IL-2 late (IL-2m3) - instrument panel

1:48 IL-2 late (IL-2m3) instrument panel is a pre-painted photo-etched instrument panel from the Polish maker Yahu Models for models of the late version of the IL-2 ground-attack aircraft in 1:48 scale.
In stock
5.16 €
IBG modelsIBG720321:72

1:72 Chevrolet C60S with Holmes breakdown

An injection-molded plastic kit of the Chevrolet C60S with a Holmes crane (a wrecker) in 1:72 scale from IBG Models.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.