30MS OTPION BODY PARTS TYPE S02 [COLOR B]

The set

Optional body parts for the figures from Bandai's 30MS kit range. The range is built on the idea that the parts of a figure can be interchanged, and these accessory sets supply further variants for that. The designation Type S02 tells the form of the parts within the range apart, while the qualifier Color B tells the color finish apart: the same type comes out in several color variants, so both have to be watched when buying.

What can be done with it

The parts are fitted so that they can be taken off again, so you can rebuild one figure in stages and mix the sets with one another. If you are building several figures of the range side by side, it is precisely the swapping of body parts and color variants that will tell them apart even though they start from the same basis. Which parts the package carries and how they are fitted is given in the instructions enclosed by the manufacturer.

Building and painting tips

In this range the parts are usually colored in advance and can be used straight away. After separating them, cut the excess material away with a sharp blade a little from the part and sand the rest down, so that no groove is left on a visible surface. Anyone who wants to paint should wash and degrease the surface and apply the paint in thin coats; on joints and fits that are meant to come apart, go easy on the paint, because an extra layer can make a joint seize up and taking it apart then ruins the surface.

Who it is for

The set is for builders of 30MS range figures who put a figure together their own way and want a choice of several appearances and color finishes.

• optional body parts for the figures of the 30MS kit range
• the Type S02 form, color variant B
• the parts can be fitted and interchanged between sets
• the contents of the package and the procedure are given in the instructions enclosed by the manufacturer

A figure, paints and glue are not the subject of this item, unless stated otherwise.