6 foot braided air hose 1/8 inch X 1/4

Braided air hose for an airbrush (about 1.8 m)

This air hose from AMMO by Mig Jimenez serves to connect the airbrush to a source of compressed air (a compressor). The length corresponds to about 6 feet, that is roughly 1.8 meters, which gives a comfortable reach around the work surface. The outer braiding increases the resistance to abrasion and to kinks. The couplings have 1/8 and 1/4 inch threads, which are the usual sizes in airbrush equipment.

Use

• Connecting the airbrush to a compressor or another source of compressed air.
• Replacement of a worn or leaking hose.
• A comfortable reach across the work surface thanks to the length of around 1.8 meters.
• Durable braiding protecting the hose against abrasion.

Who the hose is for

For modelers using an airbrush who need a reliable and durable connection to a compressor. Before buying, check that the threads of the couplings match your airbrush and compressor, or use an adapter.

This is an airbrush accessory, not a paint and not the whole tool. The dimensions are given approximately, after conversion from inch units.