A sheet of white ABS with a relief of small rectangles 4 x 1 mm, thickness 0.75 mm, size 200 x 300 mm.
Responsibility details are not available.
The surface of the sheet carries regularly laid rectangles measuring 4 x 1 millimeters, pressed directly into the plastic. It is therefore not a print that would disappear once sanded, but a real raised structure. At larger sizes it serves as paving or cladding, at smaller ones as the brickwork of apartment houses, factory halls and station buildings.
The sheet measures 200 x 300 millimeters and is 0.75 millimeters thick; the material is white ABS with a flat surface. The thickness is chosen so that the sheet holds its shape on a vertical wall and can still be cut with a knife: it is enough to score it several times and snap the plastic over the edge of a table.
For joining, use a glue meant for hard plastics or super glue; ordinary modeling cement for polystyrene has a weaker effect on this material. The flat surface holds paint even without a base, but it still pays to spray a thin primer first, on which a drier application for bringing out the joints then works better. Cover the corners of buildings with a thin strip of plastic, otherwise the cut will show.
The simplest route goes through a dark base, over which you pass with an almost dry brush or spray a lighter tone from above. A shadow stays in the joints and the surface at once gains depth. Anyone who wants to go further can color the individual bricks in different shades and then pull the whole together with a thin coat of diluted paint. At the end it pays to sand the edges lightly, so that the structure rubs through in places and the wall looks worn.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
