The Fine Art 0.2 mm airbrush is a dual-action airbrush with a gravity-feed cup and a 0.2 mm nozzle, intended for fine lines and detailed modeling work.
Responsibility details are not available.
This is a modeling tool, not a kit. The airbrush works in dual-action mode, so the trigger controls the air supply and the amount of paint separately, and does so progressively during spraying. The paint is filled into a cup integrated in the upper part of the body, which has a lid against spills. A nozzle 0.2 mm in diameter is among the finest and is intended for work with well thinned paint.
Only paint thinned to the consistency of milk will get through a 0.2 mm nozzle, so with thick acrylics and primers reach for a wider nozzle instead. Choose a lower working pressure, usually around one to one and a half atmospheres, and keep the distance from the surface short, otherwise the line will bleed. After every session flush the airbrush with the appropriate thinner or cleaner, draw the needle out toward the rear and never clean the tip with a hard object, as it bends easily. If there is a longer break, leave cleaner in the system so that paint does not dry in the channel.
Ventilate when spraying and use respiratory protection. Paints and thinners may be flammable, so follow the instructions of their manufacturer.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
