A brass I-section 305 mm long with a 1 x 2 mm profile. The package contains one piece.
Responsibility details are not available.
A brass I-section, that is two parallel flanges joined in the middle by a web. Brass is strong and dimensionally stable, so even a thin section does not twist of its own accord and will take more load than a plastic rod of the same profile. The surface can be sanded and polished, and the material solders well.
The section is 305 mm long with a profile of 1 x 2 mm. There is one piece in the package. The section is a semi-finished material, so it replaces no particular part and you cut the lengths you need from it yourself.
A girder profile is used wherever the real structure is meant to be visible on a model: crane runways, gantries, bridges, roof trusses of industrial halls, trailer frames and supports in dioramas. It also serves as a hidden stiffener inside large models, where a plastic part sags on its own.
Part the section with a fine metal saw or with side cutters and then square the cut up with a file; it cannot be cut with a file alone. Chamfer the ends so that the parts meet without a gap. You can join them with super glue, at loaded points rather with two-part epoxy, or by soldering with tin. Before painting, wash and degrease the section and apply a primer intended for metal, otherwise the paint will not hold on smooth brass.
Tools, glue and paints are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
