The largest of the sizes in the range, Bullet-Proof Bolt w/Wrench Flats 0.7 mm, aims at massive joints and the large scales. The box holds 171 pieces.
Responsibility details are not available.
The most robust of the sizes you will find here within the range of bolts with flats. It is made by three-dimensional printing, the hole for seating it should be five tenths of a millimeter and in the box you will count 171 pieces.
In 1:35 scale the head gives over 2.4 centimeters on the real subject. That is a genuinely massive fastener: the anchoring of add-on armor, the joints of ship superstructures, flanges on heavy construction machinery or the frame of a towed trailer. In 1:24 and 1:25 scale it falls naturally on the chassis of a truck and on the mounting of an axle. On railroad models in the large scales you will seat the head on the fittings of buffers and on the feet of a frame.
The part can be taken between the fingers without springing away across the whole table, which is certainly not the case with the smaller sizes. There are, however, the fewest pieces in the whole range, so try the arrangement out dry first and only then reach for the glue. A drill of five tenths of a millimeter also holds its shape and breaks only exceptionally, so drilling goes faster. If you want regular spacing, mark the intervals out on a strip of paper and use it as a template. Put the remaining pieces away in a resealable bag, otherwise they will roll away around the workshop.
The set does not hold tools, glue or consumables.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
