The Flyhawk 1:700 photo-etched net (1 mm mesh spacing) is a general-purpose photo-etched material with a net pattern of 1 mm mesh spacing for adding detail to ship models.
Responsibility details are not available.
This is a general-purpose photo-etched material, not a model. The sheet carries a fine metal net with a regular mesh of roughly 1 mm spacing. The net serves for making and completing all kinds of netting on ship models in 1:700 scale, such as safety nets, screens, baskets and other details that plastic cannot capture faithfully.
Cut the shape you need straight out of the sheet with a sharp knife on a hard surface. The net can be shaped and bent a little as required. Use cyanoacrylate glue (super glue) to fix it in place. Degrease the material before painting and apply primer so that the paint adheres better. Thanks to the regular 1 mm spacing, the net suits coarser and clearly visible elements.
This is not a finished set for a particular ship but a general-purpose photo-etched material. It does not contain paints or glue.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
