Mr. Air Hose PS (Thin,4mm) Spiral

Mr. Air Hose PS, a thin 4 mm coiled hose, from Gunze

A spare and supplementary accessory for an airbrush. The hose carries compressed air from the compressor or from the pressure source to the airbrush. The coiled design pulls itself back during work, so the hose does not crawl across the table, does not drag over a freshly painted model and does not catch on the edge of the bench. The thin version is lighter than a heavy braided hose and pulls the airbrush down less, which anyone who sprays for longer stretches will appreciate. The figure of 4 mm in the name refers to the design of the hose, not to the scale of a model.

Use

• Connecting an airbrush to a source of compressed air.
• A replacement for a worn or split hose.
• Suitable wherever a loose hose on the working surface is a nuisance.
• Lightening the setup during longer spraying sessions on small parts.

Who it is for

For modelers who already have an airbrush and are dealing with the connection to a compressor, whether as a replacement or as a second hose for a spare airbrush. Before you buy, check the threads on your airbrush and on your compressor, and count on an adapter if need be.

The length of the hose, the type and size of the threads and the maximum working pressure are stated on the box. Do not kink the hose, protect it from sharp edges and solvents and release the pressure in the line after work.