Spanish Civil War (Nationalists) Set

A set of four acrylic paints for the hardware of the Nationalist side in the Spanish Civil War: dark gray, burnt brown, sand yellow and dark green.

Manufacturer AMMO of Mig Jimenez
Product EAN9991117361253

Responsibility details are not available.

11.96 €
9.88 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Spain as a testing ground

The war of 1936 to 1939 brought to the Iberian Peninsula hardware that was only learning how to fight. German light tanks, Italian tankette vehicles and the aircraft of both countries went through their first real action here, and their finishes changed several times over those three years: from the factory dark gray through hastily oversprayed field patterns to blotches applied right at the unit.

What the set contains

The package holds four shades: a dark gray to the German prewar standard, a burnt brown, a sand yellow and a dark green. It is exactly this foursome that covers both the single-color finishes and the field blotch patterns, which arose on the southern front from a combination of two or three colors applied freehand.

Properties of the line

These are acrylic paints with a water-thinnable binder. The consistency is set so that they can be sprayed practically without thinning and at the same time leave no brush marks when working on a surface. They dry matte, so later coats of dust and clear varnish sit on them well.

How to work with the shades

On a tank the dark gray rarely stays clean; it pays to brighten it with a drop of the sand yellow on the horizontal surfaces and, the other way round, to darken it in the shadows under the fenders. On blotch patterns, laying them on with a soft brush gives a better result than masking, because the edges of the blotches were blurred and irregular at the time. The package does not hold thinner, brushes or a model. Before spraying it is worth shaking the bottle honestly, because earth pigments settle to the bottom faster than the others.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Four shades. The supplier's list names a dark gray, a burnt brown, a sand yellow and a dark green.

In most cases yes. For fine work and low pressure, a drop of water or of the thinner of the line will help.

The shades aim above all at ground hardware, but the sand yellow and the dark green find a use on the period aircraft of both sides of the conflict too.

It dries matte. If a gloss surface is needed under decals, a separate intermediate coat is applied.

Last seen

AMMO of Mig JimenezATOM-20757

Spanish Civil War (Nationalists) Set

A set of four acrylic paints for the hardware of the Nationalist side in the Spanish Civil War: dark gray, burnt brown, sand yellow and dark green.
In stock
11.96 €
1:35 B-TYPE LONDON OMNIBUS 1919-25 %Stock ClearanceFavorite
MiniartMA380311:35

1:35 B-TYPE LONDON OMNIBUS 1919

MiniArt 1:35 B-Type London Omnibus 1919 is a detailed injection-molded plastic kit of the legendary London double-decker bus from the end of the First World War.
5 leftof 10
46.76 €35.08 € You save 11.68 €
IBG modelsIBG725451:72

1:72 Fw 190D-9 Over Czech Lands

An injection-molded plastic kit of the Focke-Wulf Fw 190D-9 Over Czech Lands in 1:72 scale from IBG Models.
In stock
19.16 €
EduardFE12081:48

1:48 Tempest Mk.II seatbelts STEEL

Pre-painted steel seat belts for the Hawker Tempest Mk.II, 1:48 from Eduard. Photo-etched belts in steel for a faithful fighter seat.
In stock
6.80 €
MengCS-0091:24

1:24 Audi R8 LMS GT3 EVO II Absolute Racing

The Audi R8 LMS GT3 EVO II in the Absolute Racing version, 1:24 scale , is a plastic kit of a racing car of the GT3 category from the manufacturer Meng.
In stock
75.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.