Fengda - Tryska 0,3 mm

Fengda 0.3 mm nozzle, a replacement nozzle for an airbrush

A replacement nozzle with a diameter of 0.3 mm for airbrushes of the Fengda brand. The nozzle is a fine, precisely machined part through which the paint passes while spraying; its diameter decides the amount and the fineness of the paint applied. The 0.3 mm diameter is the most universal and most common choice, as it handles base and covering coats as well as ordinary camouflage transitions. It serves as a replacement for a worn, clogged or damaged part.

Use

• replacing a worn, bent or damaged nozzle of a Fengda airbrush
• the universal 0.3 mm diameter: camouflage, continuous surfaces, base and covering coats
• the nozzle and the needle must have the same diameter, so combine a 0.3 mm nozzle with a 0.3 mm needle
• after replacing it, check the seating and the seal so that spraying is smooth with no air leaking
• clean it carefully with a suitable cleaner; it is a fine part prone to damage

Who the part is for

For modelers who own a Fengda airbrush and need a replacement nozzle or the universal 0.3 mm diameter for ordinary modeling work. The 0.3 mm diameter will be appreciated by beginners and advanced builders alike as a reliable universal choice.

This is a small and fine part with a delicate opening, so handle it carefully, do not overtighten it during fitting and protect it from bending. For correct function always combine the nozzle with a needle of the same diameter. Keep out of the reach of children.