Hexagonal Bolt 0.3 mm

Hexagonal bolts 0.3 mm, modeling details

The set contains miniature imitations of hexagonal bolt heads of 0.3 mm. It is not a kit or an accessory for one particular model, but a universal detailing material with which indistinctly cast or entirely missing bolts on a model are replaced. The 0.3 mm size is the finest of the whole range offered and is used where a bolt should be barely noticeable.

Use

• Sand indistinctly cast bolt heads smooth and replace them with new ones, and the shape will read better
• Add bolts where the kit mold left them out, for example on flanges, hatches and brackets
• Use tweezers with fine tips; parts of this size cannot be handled with the fingers
• Bond with cyanoacrylate applied in a minimal amount, ideally with the tip of a wire or a toothpick
• Mark the layout out beforehand with a fine pencil so as to keep the spacing regular

How to choose the right size

Choose the size according to the scale of the model and to how prominent the bolt should be. In general, the smaller the scale, the finer the dimension you need; the 0.3 mm size is therefore the most common choice for small scales and fine details. The brand makes this type of bolt in a whole range of sizes and also produces a set covering the complete range, which pays off if you detail regularly and do not want to buy a size each time.

Who the set is for

It suits modelers who raise the level of detail on vehicles, aircraft and ships alike and want bolts that are sharp and even. Working with parts this small calls for a steady hand, good light and tweezers, so the set is more for advanced builders.

The set contains detailing parts only. Glue, paints and a kit are not included.