A trigger attachment for spray cans. It replaces the pressure of a finger on the nozzle with a lever, which doses the paint more smoothly.
Responsibility details are not available.
Spraying straight from a can has one weakness: the nozzle is worked with the pad of the forefinger, the finger tires during longer work and the pressure on the nozzle starts to fluctuate. A trigger attachment solves this difficulty by transferring the control to a lever that you press with your whole hand. The coat is then more even, the paint opens up gradually more easily and you hold the can more securely even in unusual positions, for instance from below or at an angle above the model.
The attachment is fitted onto the can from above, so that the lever sits on the nozzle. Before the first use, check that the shape of the neck of your can matches, because the dimensions differ between brands. Then you spray as usual: shake the can before working, start off the model and pass over the whole area in a smooth movement.
After spraying, turn the can upside down and press briefly until only gas comes out; that flushes the nozzle and it will not dry up next time. Then take the attachment off and wipe it, so that no dried paint stays in the lever. Work in a well ventilated space and protect the surroundings, because an aerosol carries a fine mist further than one expects.
This is the attachment itself. Spray paints and other accessories are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
