Triangular Rod (1 pcs) H-0,8mm W-0,8mm L-250mm

Plastruct Triangular Rod 0.8 x 0.8 x 250 mm

A triangular styrene rod with a section of 0.8 x 0.8 mm (the legs of the triangular profile) and a length of 250 mm. It is a precisely extruded profile in polystyrene (styrene), which cuts, sands, drills and glues easily. The triangular section suits corner stiffeners, run-ups, strips and the reinforcing of angled joints. The package holds one piece.

Use

• Corner stiffeners and run-ups between the walls of your own structures.
• Adding missing detail on models of aircraft, vehicles, ships and buildings.
• Building dioramas, railroad layouts, architectural mock-ups and technical models.
• Reinforcing glued joints and angled edges.

Work tips

Part the profile with a sharp blade or a fine saw and dress the edges with abrasive paper. Styrene profiles are joined with modeling cement for plastic (liquid poly cement), while cyanoacrylate glue gives a firm joint with dissimilar materials. The surface can be primed and sprayed with ordinary modeling paints.

Who the material is for

• Modelers who build and adapt parts to their own measurements.
• Makers of dioramas, mock-ups and railroad layouts.
• Experienced and beginning modelers after an accurate styrene profile.

This is a raw building material, not a finished model or a kit. Glue and paints are not included in the package.