A modeling marker with red paint under the designation X-07, for touching in and for small details applied straight from the tip.
Responsibility details are not available.
A marker with paint deals with the situations where an airbrush is pointless and a brush is slow: touching in a scuffed spot, a red stripe on a propeller, a warning stripe, the edge of a hatch, small additions on a deck or in a cockpit. The paint is applied straight from the tip, so mixing and washing a brush fall away and the work is done in a moment.
This is one marker with a red shade, the manufacturer's part number X-07. The volume of the filling, the coverage, the data on the composition, the safety instructions and the recommended thinner are given on the packaging. Do not try a thinner from another range until you have checked that it is meant for this paint.
Shake the marker thoroughly before work and run the tip in on a piece of scrap plastic until the paint starts to flow evenly. Apply in thin coats and let them dry; one thick coat takes long to dry and the marks of the tip stay in it. On a finished model, try the shade out in a hidden place first. The paint can also be squeezed from the tip into a dish and applied with a brush, which comes in useful for precise edges and small areas.
It suits anyone who builds models and needs to repair a small thing quickly without getting paints ready. The model, the brushes and the thinner are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
