1:144 Mikoyan MiG-29 Fulcrum wheels w/ weighted tires, early

1:144 Mikoyan MiG-29 Fulcrum wheels w/ weighted tires, early

3.96 €
Add to Cart

1:144 Mikoyan MiG-29 Fulcrum wheels w/ weighted tires, early

Armory 1:144 - wheels for the MiG-29 Fulcrum with weighted tires, early version is a resin replacement for the landing gear wheels with a sagged contact patch, not an aircraft kit.

Scale1:144
Manufacturer Armory
Product EAN8591111000000

Responsibility details are not available.

3.96 €
3.27 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Armory 1:144 - MiG-29 Fulcrum wheels with weighted tires, early version

This is not an aircraft model but a detail set. The resin wheels replace the landing gear wheels from the plastic MiG-29 kit in 1:144 scale. The tires are cast with a weighted, that is, flattened contact patch, as if the machine were really standing on them. The release corresponds to the early version of the aircraft.

The real subject

The MiG-29 is a twin-engine supersonic fighter of Soviet design from the 1980s. It has a nose gear and two main legs that retract into the fuselage. The wheels and tires differed between the early and the later batches in tread as well as in the treatment of the rim, which is why the castings are offered in several versions; this one is intended for early machines.

Usage tips

First wash the castings in lukewarm water with a drop of dish soap so that the mold release agent residue disappears from the surface, otherwise neither primer nor paint will hold. Cut the casting block off with a saw or a sharp scalpel, never break it off; resin cracks unpredictably. Make the cut where the contact surface of the tire touches it, because the resulting flat spot will be hidden anyway. In 1:144 scale the parts are tiny, so work over a mat and do not spread the sanding dust around the workshop; wear a mask for heavier sanding. They are attached with cyanoacrylate glue, because cement for plastic has no effect on resin. Before attaching them, check that the flattened contact patch points straight down; a tilted wheel is immediately visible on a finished model. Once the tires are sprayed, lift them with a fine pigment so that they do not look like a piece of uniform black.

Who the set is for

  • Builders in small scales who want a realistic tire contact patch
  • Modelers building early versions of the MiG-29
  • Builds where the kit wheels look hard and overinflated
  • Modelers with experience of resin and cyanoacrylate glue

This is an accessory for a model, not a kit. The model itself, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of replacement wheels, that is, an accessory. The MiG-29 model has to be obtained separately.

The tire is cast with a sagged contact surface, so the model looks as if it were really standing on its wheels.

With cyanoacrylate glue. Ordinary cement for plastic does not dissolve resin and the joint will not hold.

Yes. The mold release agent residue has to be washed off with lukewarm water and dish soap, otherwise the paint will not hold.

Last seen

ArmoryARAW140111:144

1:144 Mikoyan MiG-29 Fulcrum wheels w/ weighted tires, early

Armory 1:144 - wheels for the MiG-29 Fulcrum with weighted tires, early version is a resin replacement for the landing gear wheels with a sagged contact patch, not an aircraft kit.
In stock
3.96 €
Quinta StudioQD48637

1.48 B-24D/B-24J Liberator. Nose, central and rear compartments. 3D-Printed & coloured Interior on decal paper (HobbyBoss)

B-24D/B-24J Liberator, nose and central and rear compartments is a colored 3D-printed interior on decal paper in 1:48 scale from Quinta Studio for the B-24 Liberator bomber.
In stock
19.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.