The etched set HGW 1:32 AEG G.IV - Exterior adds fine external metal details to a large-scale model of the German twin-engine bomber. It is not a model but a detail accessory.
Responsibility details are not available.
This is a detail photo-etched accessory, not a model of an aircraft. The set brings fine metal parts picking out the external surface details of the airframe: small fittings, handles and exterior panels on a large-scale model of the German twin-engine AEG G.IV bomber biplane of the First World War in 1:32 scale.
The AEG G.IV was a German twin-engine bomber biplane of the First World War. It was powered by two inline engines and was used above all for tactical bombing behind the front line. A large airframe with two engine nacelles offers a whole range of surfaces suitable for refining external detail.
The etched parts are of thin sheet (brass or steel) on a common fret. Cut the individual parts off with a sharp knife on a hard surface and make the bends exactly along the marked lines, ideally with a bender or a straight blade. Glue with cyanoacrylate; on larger areas two-part epoxy can be used for more time to set things in place. Degrease the flat sheet before painting and lay on a thin coat of primer, so that the fine relief stays sharp.
This is not a complete model of an aircraft. The set does not contain glue, paints or a kit; it serves as a detail accessory to a base model.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
