The Artillery models 1:32 canopy mask for the PZL.11c is a pre-cut self-adhesive mask for the glazing of a model of the Polish fighter. It is not a kit.
Responsibility details are not available.
A pre-cut self-adhesive mask for the glazing in 1:32 scale for a model of the PZL P.11c fighter. It is aimed specifically at masking the cockpit, not at a complete set for the whole model. The product is not a kit and holds no construction parts and no decals.
First clear the glazing of fingerprints and dust, ideally with a soft cloth and clean water. Do not use solvents on clear parts; they fog them. Transfer the mask with pointed tweezers, lay it down and press the edges in place. Spray the cockpit interior shade first, then primer and finally the top camouflage. Take the mask off while the paint is still flexible. With open cockpits it is worth masking the inside of the fuselage as well, so that no paint from the airbrush gets in there.
The PZL P.11c was a Polish single-seat fighter of the 1930s with the characteristic high gull wing of the so-called Polish type, which gave the pilot a good view upwards. It was powered by a radial engine and the landing gear was fixed, with aerodynamic wheel spats. The cockpit was open, protected only by a small windscreen, so the masking covers exactly that small but exposed area.
The package holds the glazing mask only. The model, paints and glue are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
