The photo-etched HGW 1:32 R.E.8 Harry Tate - Super Detail Set is an extensive set of fine metal parts for a large-scale model of the British reconnaissance biplane. It is not a model, but a detail accessory.
Responsibility details are not available.
This is an extensive photo-etched detail accessory, not a model of the airplane. It is intended for a large-scale model of the British two-seat reconnaissance biplane the R.E.8 of the First World War in 1:32 scale. The set brings fine metal parts for bringing out both the cockpit and the airframe that injection-molded plastic cannot reach.
The R.E.8 was a British two-seat reconnaissance and observation biplane of the First World War, known among its crews by the nickname Harry Tate. Its crew consisted of a pilot and an observer-gunner, and an inline engine provided the power. The machine was among the most widespread British observation aircraft on the Western Front.
The photo-etched parts are of thin sheet, brass or steel, on a common fret. Cut the individual parts off with a sharp knife on a hard surface and bend the folds exactly along the marked lines, best of all in a bending tool or on a straight blade. Glue with super glue (cyanoacrylate); on larger surfaces a two-part epoxy can be used for a longer time to position the part. Degrease the flat sheet before painting and apply a thin layer of primer, so that the fine relief stays sharp.
This is not a complete model of the airplane. The set does not contain glue, paints or a kit; it serves as a detail accessory to a base model.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
