SX-Art masking stencils for the Msta-S 152 mm self-propelled howitzer in 1:35 scale. The motif is sprayed onto a model in paint instead of a decal being stuck on.
Responsibility details are not available.
The set contains self-adhesive masking stencils for a model of the Russian Msta-S 152 mm self-propelled howitzer in 1:35 scale. It is not a kit. The stencils are stuck to a painted and fully cured surface, oversprayed with a second color, and once they are taken off the motif remains, formed directly by the finish and not by the film of a decal.
A self-propelled howitzer has an extensive hull and a large turret with a long barrel, so markings are placed on it on large flat areas, where every imperfection is visible. A decal wrinkles easily here, a glossy outline remains after it on a matte finish and silvering is a risk. A sprayed motif behaves like the rest of the finish, stands varnishing, a wash and pigments and looks more believable after weathering.
The base must be smooth and fully cured, otherwise a mask will tear the paint away when removed. Reduce the tack of a stencil by laying it briefly on clean cloth. Apply the paint thinned, in several very thin coats and with an airbrush at a low pressure at a right angle to the surface, so that it does not run under the edge. Take the stencils off shortly after the paint has set, with tweezers and at a sharp angle. Reckon with single use.
The package contains the masking stencils alone. A model, paints and thinners are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
