A photo-etched wall mount for a power line with a street light in 1:35 from the manufacturer Aber. A diorama accessory: a line bracket with a lamp for the facades of city buildings.
Responsibility details are not available.
This is a photo-etched metal diorama accessory in 1:35 scale from the Polish manufacturer Aber. The set represents a wall bracket for a power line together with a street light, that is, a feature anchored in a city straight into the facade of a building. It is not a building kit but a detail that brings a building to life.
A bare wall in a diorama looks unfinished. A bracket with a lamp gives a facade scale, a vertical line and a reason why a wire runs above the street. Fine wire or thread can be strung from the mount to create a line across a scene, and the lamp can even be lit for real if you are building a diorama with lighting.
Separate the parts with a sharp scalpel on a hard surface, and never break them out by twisting. A photo-etch bending tool or two steel rulers will serve for the bends. Glue with cyanoacrylate glue (super glue); a two-part epoxy holds better on larger joints. Degrease the metal before painting and lay down a base coat meant for metals, and only then acrylics or enamels. You create weathering with a wash in the joints, a drybrush and pigments.
This is a diorama accessory, not a complete model. Glue, paints and a base board are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
